Linux培训
达内IT学院

400-111-8989

为最佳性能调优 Nginx

  • 发布:Linux培训
  • 来源:网络
  • 时间:2015-07-01 17:34

通常来说,一个优化良好的 Nginx Linux 服务器可以达到 500,000 – 600,000 次/秒 的请求处理性能,然而我的 Nginx 服务器可以稳定地达到 904,000 次/秒 的处理性能,并且我以此高负载测试超过 12 小时,服务器工作稳定。

这里需要特别说明的是,本文中所有列出来的配置都是在我的测试环境验证的,而你需要根据你服务器的情况进行配置:

从 EPEL 源安装 Nginx:

yum -y install nginx

备份配置文件,然后根据你的需要进行配置:

cp /etc/nginx/nginx.conf /etc/nginx/nginx.conf.orig

vim /etc/nginx/nginx.conf

# This number should be, at maximum, the number of CPU cores on your system.

# (since nginx doesn't benefit from more than one worker per CPU.)

# 这里的数值不能超过 CPU 的总核数,因为在单个核上部署超过 1 个 Nginx 服务进程并不起到提高性能的作用。

worker_processes 24;

# Number of file descriptors used for Nginx. This is set in the OS with 'ulimit -n 200000'

# or using /etc/security/limits.conf

# Nginx 最大可用文件描述符数量,同时需要配置操作系统的 "ulimit -n 200000",或者在 /etc/security/limits.conf 中配置。

worker_rlimit_nofile 200000;

# only log critical errors

# 只记录 critical 级别的错误日志

error_log /var/log/nginx/error.log crit

# Determines how many clients will be served by each worker process.

# (Max clients = worker_connections * worker_processes)

# "Max clients" is also limited by the number of socket connections available on the system (~64k)

# 配置单个 Nginx 单个进程可服务的客户端数量,(最大值客户端数 = 单进程连接数 * 进程数 )

# 最大客户端数同时也受操作系统 socket 连接数的影响(最大 64K )

worker_connections 4000;

# essential for linux, optmized to serve many clients with each thread

# Linux 关键配置,允许单个线程处理多个客户端请求。

use epoll;

# Accept as many connections as possible, after nginx gets notification about a new connection.

# May flood worker_connections, if that option is set too low.

# 允许尽可能地处理更多的连接数,如果 worker_connections 配置太低,会产生大量的无效连接请求。

multi_accept on;

# Caches information about open FDs, freqently accessed files.

# Changing this setting, in my environment, brought performance up from 560k req/sec, to 904k req/sec.

# I recommend using some varient of these options, though not the specific values listed below.

# 缓存高频操作文件的FDs(文件描述符/文件句柄)

# 在我的设备环境中,通过修改以下配置,性能从 560k 请求/秒 提升到 904k 请求/秒。

# 我建议你对以下配置尝试不同的组合,而不是直接使用这几个数据。

open_file_cache max=200000 inactive=20s;

open_file_cache_valid 30s;

open_file_cache_min_uses 2;

open_file_cache_errors on;

# Buffer log writes to speed up IO, or disable them altogether

# 将日志写入高速 IO 存储设备,或者直接关闭日志。

# access_log /var/log/nginx/access.log main buffer=16k;

access_log off;

# Sendfile copies data between one FD and other from within the kernel.

# More efficient than read() + write(), since the requires transferring data to and from the user space.

# 开启 sendfile 选项,使用内核的 FD 文件传输功能,这个比在用户态用 read() + write() 的方式更加高效。

sendfile on;

# Tcp_nopush causes nginx to attempt to send its HTTP response head in one packet,

# instead of using partial frames. This is useful for prepending headers before calling sendfile,

# or for throughput optimization.

# 打开 tcp_nopush 选项,Nginux 允许将 HTTP 应答首部与数据内容在同一个报文中发出。

# 这个选项使服务器在 sendfile 时可以提前准备 HTTP 首部,能够达到优化吞吐的效果。

tcp_nopush on;

# don't buffer data-sends (disable Nagle algorithm). Good for sending frequent small bursts of data in real time.

# 不要缓存 data-sends (关闭 Nagle 算法),这个能够提高高频发送小数据报文的实时性。

tcp_nodelay on;

# Timeout for keep-alive connections. Server will close connections after this time.

# 配置连接 keep-alive 超时时间,服务器将在超时之后关闭相应的连接。

keepalive_timeout 30;

# Number of requests a client can make over the keep-alive connection. This is set high for testing.

# 单个客户端在 keep-alive 连接上可以发送的请求数量,在测试环境中,需要配置个比较大的值。

keepalive_requests 100000;

# allow the server to close the connection after a client stops responding. Frees up socket-associated memory.

# 允许服务器在客户端停止发送应答之后关闭连接,以便释放连接相应的 socket 内存开销。

reset_timedout_connection on;

# send the client a "request timed out" if the body is not loaded by this time. Default 60.

# 配置客户端数据请求超时时间,默认是 60 秒。

client_body_timeout 10;

# If the client stops reading data, free up the stale client connection after this much time. Default 60.

# 客户端数据读超时配置,客户端停止读取数据,超时时间后断开相应连接,默认是 60 秒。

send_timeout 2;

# Compression. Reduces the amount of data that needs to be transferred over the network

# 压缩参数配置,减少在网络上所传输的数据量。

gzip on;

gzip_min_length 10240;

gzip_proxied expired no-cache no-store private auth;

gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/xml;

gzip_disable "MSIE [1-6].";

启动 Nginx 并配置起机自动加载。

service nginx start

chkconfig nginx on

配置 Tsung 并启动测试,测试差不多 10 分钟左右就能测试到服务器的峰值能力,具体的时间与你的 Tsung 配置相关。

[root@loadnode1 ~] vim ~/.tsung/tsung.xml

tsung start

你觉得测试结果已经够了的情况下,通过 ctrl+c 退出,之后使用我们之前配置的别名命令 treport 查看测试报告。

WEB 服务器调优,第二部分:TCP 协议栈调优

这个部分不只是对 Ngiinx 适用,还可以在任何 WEB 服务器上使用。通过对内核 TCP 配置的优化可以提高服务器网络带宽。

以下配置在我的 10-Gbase-T 服务器上工作得非常完美,服务器从默认配置下的 8Gbps 带宽提升到 9.3Gbps。

当然,你的服务器上的结论可能不尽相同。

下面的配置项,我建议每次只修订其中一项,之后用网络性能测试工具 netperf、iperf 或是用我类似的测试脚本 cluster-netbench.pl 对服务器进行多次测试。

yum -y install netperf iperf

vim /etc/sysctl.conf

# Increase system IP port limits to allow for more connections

# 调高系统的 IP 以及端口数据限制,从可以接受更多的连接

net.ipv4.ip_local_port_range = 2000 65000

net.ipv4.tcp_window_scaling = 1

# number of packets to keep in backlog before the kernel starts dropping them

# 设置协议栈可以缓存的报文数阀值,超过阀值的报文将被内核丢弃

net.ipv4.tcp_max_syn_backlog = 3240000

# increase socket listen backlog

# 调高 socket 侦听数阀值

net.core.somaxconn = 3240000

net.ipv4.tcp_max_tw_buckets = 1440000

# Increase TCP buffer sizes

# 调大 TCP 存储大小

net.core.rmem_default = 8388608

net.core.rmem_max = 16777216

net.core.wmem_max = 16777216

net.ipv4.tcp_rmem = 4096 87380 16777216

net.ipv4.tcp_wmem = 4096 65536 16777216

net.ipv4.tcp_congestion_control = cubic

每次修订配置之后都需要执行以下命令使之生效.

sysctl -p /etc/sysctl.conf

别忘了在配置修订之后务必要进行网络 benchmark 测试,这样可以观测到具体是哪个配置修订的优化效果最明显。通过这种有效测试方法可以为你节省大量时间。

预约申请免费试听课

填写下面表单即可预约申请免费试听! 怕学不会?助教全程陪读,随时解惑!担心就业?一地学习,可全国推荐就业!

上一篇:使用版本控制系统的3个建议
下一篇:提高Vim和Shell 效率的9 个建议

为最佳性能调优 Nginx

  • 扫码领取资料

    回复关键字:视频资料

    免费领取 达内课程视频学习资料

Copyright © 2023 Tedu.cn All Rights Reserved 京ICP备08000853号-56 京公网安备 11010802029508号 达内时代科技集团有限公司 版权所有

选择城市和中心
黑龙江省

吉林省

河北省

湖南省

贵州省

云南省

广西省

海南省